Page 1 of 5 12345 LastLast
Results 1 to 10 of 44

Thread: 21' Eliminator Daytona

  1. #1
    wet77
    Well thought I would never do this but he goes.
    1985 21' Eliminator Daytona
    When I purchased the boat it only had 10 hours of use on it as the original owner who I purchased the boat from did not winterize the motor and cracked the block so there it sat since 1986 untill I purchased it a few years back. Hull and motor now have approx. 30 hours on it.
    Hull is in near perfect or new condition and has been reworked by Irwin Capps who did the bottom work (setback, drop keel, bubble,blueprint, and race intake) Boat is a lighter lay-up and really handles nice.
    Interior is new and custom matched to the colors in the hull.
    Autometer gauges and depth finder.
    Pump has been worked by HTP from the custom shoe, loader, ride plate ect
    Aggressor intake, Berkley suction, Jet-away, mechanical seal, Aggressor 9 vein bowl, snoot, diverter with nozzle insert, prime-a-jet, inducer, flowed and worked Bronze A aggressor impeller. Manual diverter
    Motor is a 540 Dart
    Billett splayed main caps
    4340 crank
    H beam rods
    Isky full Mech roller
    325 Dart pro 1 aluminum heads, Titanium retainers Manely valves, Inconel Exhaust valves
    Blower shop intercooler
    Weiand 6-71
    2-750 holley carbs
    10 quart pan
    Msd ignition and blower box
    Arp bolts and stainless fastners
    Braided lines on everything.
    Motor dyno at 955 hp at 6200rpm at 9 lbs boost on 110 octane
    Motor makes more HP it kept climbing on the dyno but thats as far as we took it. I have the dyno sheets.
    Boat is setup to run 93 in one tank with a 4900rpm rev limiter and 110 in the other with a 7000rpm rev limiter using a electronic fuel switching valve, switch over on the go
    I have put my heart and soul into this boat it is truely a 100 mph jet boat no Ebay speeds
    I had it up to 110 with three in the boat last Sunday and it handles like a dream, that was only WOT for 1/2 mile or so
    My wife and I are going to be looking for a bigger boat since we are looking at trying out Lake Michigan as its only 2 hours away, also starting a family soon so need to find a more (kids safe) boat for a while.
    I am asking $16,000 for boat minus motor and $35,000 as it sits.
    I have lots of pics but here is a few for now.
    http://www.***boat.com/forums/attach...1&d=1190760415
    http://www.***boat.com/forums/attach...1&d=1190760415
    http://www.***boat.com/forums/attach...1&d=1190760624
    http://www.***boat.com/forums/attach...1&d=1190760624
    http://www.***boat.com/forums/attach...1&d=1190760624

  2. #2
    Rondane
    18,000 sounds more like it.
    rondane

  3. #3
    wet77
    Playing around shooting the rooster
    Last Sunday
    http://www.youtube.com/watch?v=_QTBZ01KhnM

  4. #4
    wet77
    18,000 sounds more like it.
    rondane
    No problem $18,000 less the motor and its yours

  5. #5
    wet77
    Last Sunday 100mph++ Pass
    http://www.youtube.com/watch?v=0m6gjcKRe-4

  6. #6
    Rondane
    No problem $18,000 less the motor and its yours
    for a 1985 it better be WITH motor. I want some of what your smokin.
    Just because you overspent doesnt mean common sense and a dose of reality wont hit ya sometime.
    rondane

  7. #7
    wet77
    for a 1985 it better be WITH motor. I want some of what your smokin.
    Just because you overspent doesnt mean common sense and a dose of reality wont hit ya sometime.
    rondane
    OK for you I will give a deal $40,000 with motor
    Price goes up for trouble makers:sqeyes:

  8. #8
    uLtRADeNniS
    for a 1985 it better be WITH motor. I want some of what your smokin.
    Just because you overspent doesnt mean common sense and a dose of reality wont hit ya sometime.
    rondane
    Ron Dane.. Here you go again.. Running you mouth when you don't own a boat!
    Okay the boat isn't a steal, But far from a rip off.
    Do you have any Idea how difficult it is to find one of these hulls?.. Let alone one in this good of shape. Or how much money it costs to build a 900+ HP blower motor?
    Your just a little sour because you probably cant afford it so you have to put this guy down. I bet if he did lower it to 18k with motor you still wouldn't buy it. So go suck your mom's tit and go away!
    Bump for a bitchin boat! I hope someone from here buys it so I can see it on the river!

  9. #9
    wet77
    uLtRADeNniS
    Thanks for the good word
    I drove all the way from WI to Seattle to buy the boat so I know how hard it was to get one.
    And Yes there is allot of money in this boat but if you want to go fast you have to pay the price for sure
    Hope whoever buys it can end there search for a kick ass ride and enjoy it for years to come as its a turnkey 100mph boat.
    I would actually like more to sell it less the motor and keep the motor for my next boat:idea:

  10. #10
    IMPATIENT 1
    for a 1985 it better be WITH motor. I want some of what your smokin.
    Just because you overspent doesnt mean common sense and a dose of reality wont hit ya sometime.
    rondane
    dude, that shit is uncalled for in this section! wet is sellin a practically brand new boat, maybe you should price 1 and see what a similiar equiped tunnel would cost ya to build. we've got some of the same views about htp but you don't have to attack every thread that they get mentioned in.can't remember wet ever mentioning or attacking you or your boat in any threads.
    wet, good luck in the sale man!! if i had the $$$ i'd be all up on it very nice and clean boat:devil:

Page 1 of 5 12345 LastLast

Similar Threads

  1. 19' Eliminator Daytona
    By Duane HTP in forum Parts 4 Sale
    Replies: 0
    Last Post: 10-19-2007, 06:37 PM
  2. Replies: 31
    Last Post: 07-08-2007, 05:44 PM
  3. New Eliminator 22 Daytona
    By Poker Runs West in forum Cats & Tunnels
    Replies: 115
    Last Post: 06-01-2007, 09:29 AM
  4. Eliminator 25' Daytona
    By Charley in forum Parts 4 Sale
    Replies: 3
    Last Post: 08-23-2006, 05:59 AM
  5. 22 eliminator daytona
    By dschifan in forum Outboards
    Replies: 3
    Last Post: 06-19-2006, 08:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •