2002 TPR 19' Stealth

[Moose]

2002 19' Tom Pap Stealth w/ rounded racing keel, Floors are gel coated & flow coated, Lots of powder coating, Edlelbrock Quick Data Acquisition Computer, Auto Meter sport comp gauges and recall tack, Fiberglass racing bucket seats, Imco stainless 20gal stack tanks and powder coated 20 gal alloy side tanks if you prefer them (not in the boat) All lines are Stainless Braided W/ AN fittings, Grose Racing Engines (dyno Sheets available) 489 BBC GM-IV 4bolt 4.280 bore 4.250 Callies Crank (double keyed) all internal balanced, Eagle "ESP" rods, -3cc flat top JE/SRP Blower pistons .010 in the hole@8.4-1 compression, Crower solid roller cam, Crower over sized (.904) extreme Roller lifters. Dart Alloy Pro-1 345cc, 119cc open chambered heads, Manley extreme duty valves 2.25int 1.88ex, Comp extreme roller rockers, Comp push rods and guide plates, all ARP Bolts & studs, Wilson stud girdle, Pro race harmonic balancer, Block has eliptical (sp) painted valley for better oil return w/ valley screen and block magnets, BDS stage II 8-71 polished blower, Belt guard, 8mm belt/pulleys w/ extra pulleys, Super Chiller intercooler, Holley HP 830 carbs(2) flowed out to 1030cfm by Performance Carburetor, Enderle linkage & stainless fuel lines, "Race Pump" mechanical fuel pump & Regulator, Chrome alternator, HiTorq starter, MSD 6m-2 w/ rev limiter, MSD Pro Billet Dist w/ MSD 8mm plug wires. Rewarder 2 1/2" zoomie headers and also Rewarder twisty h20 Injected headers w/ basset mufflers for lake use. Banderlog valve for H20 control on headers.
Pump is a Aggressor intake and suction housing w/ pop off valve, JETAWAY, Don's Inducer, 17-4 shaft, AMT Bowl double drilled, flowed and race prepped and costum loader. All pump work done by MPD, 2 deg back cut shoe w/ ride plate and extra shoes & shims by HTP, AMT Droop, Place Manual Diverter w/fine tune nozzle and extra inserts.
Trailer has a swing away tongue & hydraulic disc surge brakes. Motor is Fresh with only 10 runs at the Track and 10 runs on the lake. I check plugs and change the oil filter each time out. $29,500 obo
For more info call 916 688-5995 cell 916 949-9872
I may be willing to sell boat and motor separately for the right price.
http://www.hotboatpics.com/pics/data...IM0691-med.JPG
http://www.hotboatpics.com/pics/data...IM0695-med.JPG
http://www.hotboatpics.com/pics/data...IM0694-med.JPG
http://www.hotboatpics.com/pics/data...IM0690-med.JPG
http://www.hotboatpics.com/pics/data...IM0689-med.JPG
http://www.hotboatpics.com/pics/data...IM0692-med.JPG
http://www.hotboatpics.com/pics/data...dayRd2-med.jpg

[RIVERTIME247]

check your pm's let me know.

[widowmaker]

bump for a cool ride

[placecrafttim]

Where have you been? We missed you at Hogan this year. Anyways good luck on the sale and bump for a bad ass ride. Let me know what you will take for data system if you end up splitting it up.

[fleetimus]

That is one sweet boat!!!!!!!!!!!!!!!!!!!!!!
Bump for the Moose!!

[Oldsquirt]

Here's a closer pic of the motor.
http://www.hotboatpics.com/pics/data...MooseMotor.jpg

[Mrs.Moose on the loose]

Bump

[396_WAYS_TO_SPIT]

Bump
Ill call ya in the am

[Mrs.Moose on the loose]

Bump

[Mrs.Moose on the loose]

Bump