Results 1 to 7 of 7

Thread: NEW Jet Services @ Dana Marine

  1. #1
    Dana Marine Products
    After years of machining custom jet parts and doing jet repairs, we've added jet rebuilding services at Dana Marine Products. Dana Marine is a one stop jet service station. We do our own machining, parts distribution, powdercoating, and assembly. We use high quality proven American Turbine, Legend Jet Drive, and Place Diverter components.
    Being a machine shop by trade, we feel that we can bring alot of accuracy to jet drive rotating assemblies. Here's a couple of highlights on how we assemble jet drives,
    All wear rings are pressed in with precision billet tools. This insures that the wear ring is seated correctly. Compared to traditional installation methods of a 2X4 and a hammer, Our precision method will insure proper wear ring and impeller alignment.
    http://www.***boat.com/forums/attach...1&d=1192810524
    http://www.***boat.com/forums/attach...1&d=1192810531
    Each impeller and shaft are set up in our lathe, then indicated and precision machined to have zero runout. This means that your impeller will run straight and true on the shaft that it is being installed in your jet drive.
    http://www.***boat.com/forums/attach...1&d=1192810552

  2. #2
    Dana Marine Products
    Each jet drive is carefully assembled using precision tools to insure proper operation including seal and bearing alignment. With proper machining and assembly, we can insure that each jet drive is going to produce maximum efficiency and a long life.
    http://www.***boat.com/forums/attach...5&d=1193097395
    Contrary to many shops that have different levels of jet rebuilds such as stage 1, 2, or 3, Dana Marine uses our precision methods of assembly and machining on every jet drive that we rebuild. We use high quality, flow tested American Turbine parts on every rebuild that we do. We also do our own in-house powdercoating, so if you want to freshen up that paint job, we can do that too. There are several upgrade options to jet rebuilds. We can build them from mild to wild. Rebuilds start @ $679.00.
    http://www.***boat.com/forums/attach...1&d=1193097502
    http://www.***boat.com/forums/attach...1&d=1192814333
    These jet rebuild services are performed by Dana Marine Products, not by an outside source. That means your dealing directly with a trusted name that delivers quality and performance. It also offers you the customer a piece of mind knowing that you're working with a company that will stand behind their work.

  3. #3
    firstjetinMN
    Each jet drive is carefully assembled using precision tools to insure proper operation including seal and bearing alignment. With proper machining and assembly, we can insure that each jet drive is going to produce maximum efficiency and a long life.
    http://www.***boat.com/forums/attach...1&d=1192809583
    Contrary to many shops that have different levels of jet rebuilds such as stage 1, 2, or 3, Dana Marine uses our precision methods of assembly on every jet drive that we rebuild. We use high quality, flow tested American Turbine parts on every rebuild that we do. We also do our own in-house powdercoating, so if you want to freshen up that paint job, we can do that too. There are several upgrade options to jet rebuilds. We can build them from mild to wild. Rebuilds start @ $679.00.
    http://www.***boat.com/forums/attach...1&d=1192809866
    These jet rebuild services are performed by Dana Marine Products, not by an outside source. That means your dealing directly with a trusted name that delivers quality and performance. It also offers you the customer a piece of mind knowing that your working with a company that will stand behind their work.
    What does $679 yield exactly? All new bearings, seals, wear ring, new impeller? What brand of impeller ? Aluminum ?

  4. #4
    Dana Marine Products
    $679.00 includes tear down, inspection, cleaning, a full rebuild kit (bearings, seals, wear ring, gaskets, seals), machining your impeller, and assembly.
    $779.00 includes the same service listed above with a new aluminum impeller. (size of your choice) Stainless impellers are available for an additional $670.00, bring the total to $1449.00.
    All impellers and jet rebuild parts are genuine American Turbine parts. American Turbine also now owns Legend jet drive, so Legend impellers can be substituted if requested.
    One additional thing to be listed is that we can help you select the proper parts for your rebuild. We have highly knowledgeable people on staff to help you with your jet rebuild.

  5. #5
    marinehardware520
    Spam

  6. #6
    ausaf
    Spam

  7. #7
    Legal Chemistry
    Best of luck on this venture.
    I would have used your services knowing what your costs are up front (still, there will always be the unknown). I know of many individuals that have been rapped on this, and your up front attitude will pay off.

Similar Threads

  1. Dana Marine Is On Board
    By Dana Marine Products in forum Sandbar
    Replies: 20
    Last Post: 04-16-2007, 07:26 AM
  2. Dana Marine
    By BADASS38CHEVY in forum Sandbar
    Replies: 6
    Last Post: 06-14-2006, 03:37 PM
  3. Thanks Dana Marine!!!
    By Waldo in forum Sandbar
    Replies: 6
    Last Post: 06-07-2006, 01:04 PM
  4. Dana Marine Specials????????
    By Krumbsnatcher in forum Sandbar
    Replies: 3
    Last Post: 07-14-2005, 04:04 PM
  5. Replies: 3
    Last Post: 02-01-2004, 11:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •