First off. Looking at the engine from the front cyl 1-4 are on your left ,5-8 on your right (front to rear). 5-8 are on the car's driver side.
Depending on the engine 30-32* is fine .
Sleeper CP
Big Inch Ford Lover
Ok here is the dumb question of the week. How do I time a 460 ford. This is the first one I have ever worked on. For a chevy I usually set a n/a motor at 34 total and a boosted deal at 32. These numbers vary but it is a good start I have found. Will this hold true for a ford. The motor as I can tell is all stock with points ignition. Oh yeah and how are the cylenders numbered? Is it the same as a bbc, looking at the motor 1 3 5 7 on the right and 2 4 6 8 on the left. Thanks for the help
First off. Looking at the engine from the front cyl 1-4 are on your left ,5-8 on your right (front to rear). 5-8 are on the car's driver side.
Depending on the engine 30-32* is fine .
Sleeper CP
Big Inch Ford Lover
34 is a good starting point. bbc 2468 is 1234 and 1357 is 5678 firing order is 15426378 hope this helps
thanks that should help
i rab as much as 38 in bbf.seemed to like 36-38 for me.
All of my big Fords like low timing, 32-36. Ive ran it as high as 40 but they dont want to turn the RPM when that high.