78 Hondo T-Deck project

[BIGCHRIS]

I bought this boat with plans of redoing it ,but lost interest.The boat needs the floor redone and stringers also.I have started taking the glass of the floor on the sides,i have the majority of the hardware.It is a 12% degree v drive but there is no v drive ,has a 007 casseli strut.Most of the stuff is here $1800
http://www.***boat.com/image_center/...0/100_0489.JPG
http://www.***boat.com/image_center/...0/100_0485.JPG
http://www.***boat.com/image_center/...0/100_0486.JPG[http://www.***boat.com/image_center/...0/100_0483.JPG

[BIGCHRIS]

anybody

[BA Kurtis]

That is a good boat,is the floor and stingers structurly sound or dose some of it need to be replaced?? Do you have any cav. hw and steering hw??

[Lefty]

Big C this is not the Gt deck that you had is it?

[BIGCHRIS]

Big C this is not the Gt deck that you had is it?
This is a different boat

[BIGCHRIS]

That is a good boat,is the floor and stingers structurly sound or dose some of it need to be replaced?? Do you have any cav. hw and steering hw??
The wood in the floor seems to be good ,one stringer is cracked on the drivers side and the other has broken loose from the floor about 2 foot long or so the body of the boat is very straight all of the steering is there i also have the cav plate hardware minus the plate arms i also have the mid plate and the two side supports also ( i sold the v drive to my friend and he would probally sell it also)

[BIGCHRIS]

somebody

[BIGCHRIS]

bump!!!!

[BIGCHRIS]

dfghjkl

[IMPATIENT 1]

bump
what made you lose interest?? lol