valve cover breathers

[Icarus prospector]

Not to hijack the original question, but what about an engine in a closed engine box? I've seen where the breathers are routed back to the carb, and understand the rational, but is there a better or more cosmetically appealing way?

[thatguy]

Not to hijack the original question, but what about an engine in a closed engine box? I've seen where the breathers are routed back to the carb, and understand the rational, but is there a better or more cosmetically appealing way?
The outlet side of PCV valve must go to a low pressure (vacuum) source, so the options are somewhat limited. I don't know if it would work well with the venturi tube of a pan evac system, or a PCV outlet, placed in a through transom exhaust system, that is a good question.
Tommy

[Some Kind Of Monster]

Yep, Like this. I swear by it.
Tommy
http://i152.photobucket.com/albums/s...ts/miller3.jpg
I need to do either that or a puke tank. I'm sick of cleaning oil off my transom.

[thatguy]

The part I like is the negative crankcase pressure. Small leaks kind of disappear.
Tommy

[kenneth n]

Obnoxious 001
I have a 1999-502 MPI with Iron Eagle 308 heads and a T. Crockett cam and an MSD ignition system.