rough ride,any rear shocks replacements...

[riverroyal]

that will help?Long bed 4 door 4x4 f250....Is there any other shocks that would help,or be worth it?No lift,with airbags

[jackpunx]

that will help?Long bed 4 door 4x4 f250....Is there any other shocks that would help,or be worth it?No lift,with airbags
have you taken the air out of the bags?
is this when towing ?
Long beds always bounce a bit.. I have air bags.. but when im not towing .. I take the air out

[riverroyal]

in them,i only air them up for towing.Its the fx4 truck with ranchos.It bounces a bunch,its just annoying.If bilstein or anyone made a better shock it would be worth changing the rear.
I know tthe truck is long so its never gonna go away 100%,but anything would be better.
07 with 9000 miles

[cc322]

I think Bilstiens may help some, the stock Rancho badged shocks from the factory are crap imo. I have a short bed and there is a stretch along the I10 where you really get the crap beat out of you, just the nature of the truck i suppose. Try adding some weight to the bed. Or maybe contacting Deaver springs and see what they say. You may also be running to much air in the tires what psi are you running and what size?
http://www.deaverspring.com/

[jackpunx]

I have bilstiens.. it rides better then most trucks.. I also have a 6" donahoe lift kit.. I think it rides better then when it was stock.. but that was a long time ago..LOL
good luck

[jackpunx]

I think Bilstiens may help some, the stock Rancho badged shocks from the factory are crap imo. I have a short bed and there is a stretch along the I10 where you really get the crap beat out of you, just the nature of the truck i suppose. Try adding some weight to the bed. Or maybe contacting Deaver springs and see what they say.
http://www.deaverspring.com/
donahoe put the deaver kit on mine..
but only in the front.. the rear is blocks

[cc322]

I have bilstiens.. it rides better then most trucks.. I also have a 6" donahoe lift kit.. I think it rides better then when it was stock.. but that was a long time ago..LOL
good luck
I have the dr kit as well, but I have the dr shocks, did you get the bilstiens with the kit before they started doing there own shocks?

[jackpunx]

I have the dr kit as well, but I have the dr shocks, did you get the bilstiens with the kit before they started doing there own shocks?
got it done in 04
I dont think they had them then

[riverroyal]

I think Bilstiens may help some, the stock Rancho badged shocks from the factory are crap imo. I have a short bed and there is a stretch along the I10 where you really get the crap beat out of you, just the nature of the truck i suppose. Try adding some weight to the bed. Or maybe contacting Deaver springs and see what they say. You may also be running to much air in the tires what psi are you running and what size?
http://www.deaverspring.com/
in the rear,tires are ??not sure the height.I10 through beaumont is real bad

[riverroyal]

its smooothhhh when I do thishttp://www.***boat.com/image_center/data/500/IMGP0770.JPG