dug this up and i need a little help here guys, i am installing a 10qt pan on genV 454 and have the engine on a stand upside down i noticed that the little check valve in the hole next to the threads for the oil filter was loose so i wanted to replace it and started reading up and i want to make sure i get the right part.
i will not be using a cooler and will be using the stock oil filter pad, from what i read in the above post is i need to leave the center hole open that has the threads on it the replacment part for the check valve in the hole next to it is 25013759 and opens at 11# or is it the other part 25161284 and opens at 30# if i read it right then i need the 11# valve but it seem like it would be better to have the 30# valve to force the oil thru the filter :cry: thanks alot for the time it takes to answer this but clear info will be much appreciated.