Thanks for taking the time to read this. Last year my pump started making this terible noise. It is a Berk e pump I think(clean out is outside the boat). So I took it to a shop recomended by a friend. They told me the pump needs to be rebuilt. Not knowing shit about rebuilding a pump I told them ok since I was on the road for my job. Well Tonight I decide to give everything the once over before I put the seats back in and enjoy the summer. I greased the bearing on the front of the pump which looks like it had fresh grease on it. So I moved to the back of the pump to find the two cap screws you guys always talk about thinking I would check the bowel oil. Well it is pretty obvious that the did not take these of or the little plastic cover that goes over the pump. I could not get the cap screws out and they felt really soft and were trying to round off on the corners so I did not push my luck. Also the silicone on the bolts that holds the little plastic cover on looks pretty old. Not like what you would see if new silicone was used. So here is my question. Could the pump have been rebuilt with out accessing the back of the pump? And is there a easy way for a mechanical dumb ass like me to confirm my pump was really rebuilt? Thanks for the help and any advice would be great.
Paul