Brian,
Have you tried any of the pump rebuilders?
What are you inventing?
HD
Hi all, Im toying with a few ideas and figured a spare jet drive shaft would do the trick. I prefer a used unit so I dont have to pay too much for it. Any one got a spare unit they are willing to part with ? I dont care about its condition as long as the splines are good. Thanks
Brian
Brian,
Have you tried any of the pump rebuilders?
What are you inventing?
HD
How much of the shaft do you need I have the front (splined part) half of one you could have.
BrendellaJet:
Hi all Any one got a spare unit they are willing to part with ?
Brian You can't have my unit.
Hallet Dave, if it works out, I will tell you. Miller, how long is the piece you have, and why is it not full length? As for You, Nubbs, you are gay.
I will have to look, it is about half the shaft if I remember correctly. The bowl bearing surface was shot and the impeller nut was frozen on. The back part of the shaft was not serviceable but the impeller was. So we cut the shaft so we could remove it and cut the impeller nut off in the lathe and not damage the impeller. Anyway I will measure the shat tonight if you are interested.
yes please
I probably have a stack of about 30 or so of them How many do you want. You can have some.
You dont mean for free do you? If you do, then you are awesome! Is three too many? I can give you my shipping account at work to have them shipped. Let me know. Oh yeah, if not free, then how much? Thanks Duane HTP! Thanks everyone who offered also!
Brian
I am a complete flake and forgot to measure it last night but it looks like you found a better source. I will measure it tonight anyway.