Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Any Boat shop's in 714 area code

  1. #1
    Duke
    Any reputable boat shops in that area, i'll be in Fountin Valley looking at a boat and i'd like to take the boat down to a boat shop to be looked at, compression test, leak down test, and anything else that they might recommend..
    I'v already got RC Performence and Harmin Marine in that area
    any other one's would be appreciated

  2. #2
    Havasubum
    theres Wilkes Marine close by. hes of the 55 freeway

  3. #3
    Coughlin's Law
    The guys are great at John's Custom Marine.
    714-827-7920
    John's Custom Marine
    8437 Katella Avenue
    Stanton, CA 90680
    Coughlin

  4. #4
    carbonmarine
    WILKES MARINE is the closest and by far the most reputable..
    From FV, head South on the 405 to the 55 E and two exits.. ( off at dryer road - make Left), go three lights & Left on Hallady .... simple.
    Wilkes Marine.
    (714) 540-8908

  5. #5
    Eric455
    call bruce 1714-209-0390.... you'll be happy with this guy.

  6. #6
    Rivertoys
    Coughlin's Law:
    The guys are great at John's Custom Marine.
    714-827-7920
    John's Custom Marine
    8437 Katella Avenue
    Stanton, CA 90680
    I second this, they are the best around IMO. Very reasonable too. I have all my service done there.
    RTJas

  7. #7
    bordsmnj
    Rivertoys:
    Coughlin's Law:
    The guys are great at John's Custom Marine.
    714-827-7920
    John's Custom Marine
    8437 Katella Avenue
    Stanton, CA 90680
    I second this, they are the best around IMO. Very reasonable too. I have all my service done there.
    RTJas Me Three.

  8. #8
    Chris Winn
    Rate Member posted 09-30-2003 04:49 PM
    --------------------------------------------------------------------------------
    you need to go to Extreme custom marine, they have a website called www.extremecustommarine.com, ask for Kirk. they did alot of work on my Baja that Dick Simon's really screwed up. they did make one mistake on not tightening my hose clamp on my waterpump. but as mistakes do happen, Kirk hopped in his truck and drove out to make sure that everything was ok, They even paid for my dinner and hotel that night! all of the remaining work that they have done has been perfect. they are located in Santa Ana.

  9. #9
    Duke
    thanks for all the replies, i got an appointment with rc perf. so i guess thats where i'll be headed.
    I'll post pics of my soon to be when i get it!!!
    its an 1984 Advantage with a berk je and a stock 454
    Interior can use some work but other then that everything looks to be in good running order.
    If there's noting wrong with it tomarrow, he's going to tow it up to Burbank for me!
    [ October 01, 2003, 07:34 PM: Message edited by: Duke ]

  10. #10
    phebus
    You sound excited about the boat, so I hope everything checks out well. Good luck, and happy boating.

Page 1 of 2 12 LastLast

Similar Threads

  1. Area code 809
    By essexjet in forum Sandbar
    Replies: 3
    Last Post: 09-18-2005, 10:50 AM
  2. When is it the machine shop's fault?
    By Infomaniac in forum Gear Heads
    Replies: 51
    Last Post: 09-05-2005, 12:38 PM
  3. What area code is 510?
    By dimarcobros in forum Sandbar
    Replies: 8
    Last Post: 06-03-2005, 07:02 PM
  4. Pomona area code
    By Blown 472 in forum Sandbar
    Replies: 4
    Last Post: 02-10-2005, 02:18 PM
  5. Boat Shop in 714 area code
    By Duke in forum Jet Boats
    Replies: 5
    Last Post: 09-25-2003, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •