Reply With QuoteGo talk to Adam at Wired for Sound in Temecula. He did my system and he has done a bunch of them. I ended up with 4 10's behind the back seat.
Have a 02 CC Duramax and wanted to put a 10" Autobaun in behind the back seat. Don't think I have the room and am having a real hard time finding help on the subject. Can anything be trimmed to allow it to happen? Don't want to put it between the front seats and don't want the small 6" that could go under the rear seat. Suggestions happy boaters?
Go talk to Adam at Wired for Sound in Temecula. He did my system and he has done a bunch of them. I ended up with 4 10's behind the back seat.
Originally posted by jordanpaulk
Go talk to Adam at Wired for Sound in Temecula. He did my system and he has done a bunch of them. I ended up with 4 10's behind the back seat.
Where are the pics ya were gonna send ????
I sent them to ya, you didnt' get them???
I'll send them again later today (after I get my camera out and take some more pics 'cause I deleted them after I sent them, yeah, that's what happened)
I have two 12" PG's behind the seat of mine. It can be done.
I may be pulling out the enclosure if you are interested. I am thinking about going to four 12's.
I have two 10's behind mine.. ... What we did was re mount the back seat 2" forward.. and they fit fine... good luck
Mine fit without moving the seat forward. Had to go with the roundy round 10"er's as the L5 and L7 were too deep in 10" and would have been horribly tight in an 8" even.
I'm putting two Resonant Engineering (http://www.respl.com) RX 12's behind the seat in my Std cab Dodge...if they can fit back there, you can get them in a CC Dmax.
You have a lot more room behind your seat than I do mine. Not to mention, yours slides.
Jordan and Froggy, 4 -- 10s or 12s!!!!--Jesus F. Christ that must thump. Glad to know there is hope. Will talk to Adam and Froggy about possibilies. I'm now on a mission. Thanx, Duck
Posting Permissions