I am looking for some cam recommendations. This is basically what I will have when the work is done on the engine. The heads are gm 990 (hi perf) heads. they will have a stage I port job and intakes resized to 2.250 from 2.19. The block is now stock 454 and will be bored .030". I am going to be using JE pistons(SRP) low dome keeping the CR between 9.7-10.0. I have a ram manifold with 2 holley 600cfm carbs. The pump was rebuilt by MPD and has a b cut on the impellor. I think that should cover all the details. Any and all suggestions will be greatly appreciated.
Barry