Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Arneson surface drive

  1. #1
    ryoung99
    I was curious if anyone in this group has any experience with the Arneson surface drive?
    They claim a 15-30% increase in speed using this unit. They appear to be able to replace the Bravo. I am sure the unit is not cheap but if they can deliver on their promise it would be a great way to add MPH without messing with the engine.

  2. #2
    spectras only
    back in about 1984 a buddy of mine had a 28 foot Steve Jones hull with a twin turbo 460 Ford with an Arneson drive.Great unit [bronze model],the newer models are made in aluminum [cheaper].The only problem with them is the huge rooster tail,even with the deflector mounted on,and the extra lenght versa I/O.It also seemed to be happier at faster speed [it's a surface drive unit after all].

  3. #3
    RiverDave
    The reason why they're not more popular is strictly becuase they're dangerous as all hell. For swimmers that is.
    RD

  4. #4
    spectras only
    Yes it's like a giant coctail mixer http://free.***boat.net/ubb/biggrin.gif

  5. #5
    GEOO
    I run an Arneson ASD 6 on my 18 Donzi. She run's 90mph with a small block. Check out http://arneson-industries.com/ GEOO

  6. #6
    spectras only
    geoo,can you post a picure of your boat here?

  7. #7
    GEOO
    Spectras only, Just go to Arnesons site and look under "Cool Boat's" GEOO

  8. #8
    Havasu Hangin'
    Originally posted by GEOO:
    Spectras only, Just go to Arnesons site and look under "Cool Boat's" GEOO
    Hey GEOO,
    Great boat. What did the drive, trans and steering set you back? How's the weight with the transmission? How much power ya getting out of that small block?
    I have an old Volvo drive, and have been wanting to get rid of it for years.
    http://www.goldenplasma.f2s.com/foru...es/happy34.gif

  9. #9
    spectras only
    Geoo,I just came back from the arneson site,great boat you've got there.Like your engine setup too.I see you got some tabs on to stop chinewalking?I remember a lot of donzi's had problem with the volvo outdrives in the seventies going over 55 w/o trimtabs.
    What speed you getting and how much HP?
    [This message has been edited by spectras only (edited July 26, 2001).]
    [This message has been edited by spectras only (edited July 26, 2001).]

  10. #10
    GEOO
    Havasu Hangin',
    The drive set up is not difficult. I bought a used drive and did the conversion myself.
    I won the NJPPC 24' and under radar shoot out. It was too rough to go fast. They clocked me at 79.6.
    Spectras Only,
    No problem with chime walking. I only use the tab's to keep the boat level in a cross wind. I run a Bored and Stroked Small Block Chevy. Approx. 500hp. I run a Rolla 25 pitch with a 1.33 gear at max rpm's of 6000. She run's consistently in the mid 80's and on a good day I've gps'd her at 90.2 and 90.4.
    GEOO

Page 1 of 2 12 LastLast

Similar Threads

  1. Arneson Surface Drives?
    By SoCalSouthpaw in forum Sandbar
    Replies: 7
    Last Post: 05-08-2006, 03:44 PM
  2. Arneson Surface Drive experiences
    By ECeptor in forum Sandbar
    Replies: 3
    Last Post: 08-29-2005, 07:20 PM
  3. Arneson Surface Drive
    By Kahuna in forum Sandbar
    Replies: 27
    Last Post: 02-21-2004, 08:54 AM
  4. arneson surface drives...
    By bordsmnj in forum Sandbar
    Replies: 60
    Last Post: 11-15-2003, 02:16 AM
  5. Arneson Surface Drives
    By AZKC in forum Gear Heads
    Replies: 26
    Last Post: 11-28-2002, 02:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •