This is the passenger seat of the set that Todd is putting together for me. As soon as he finishes the drivers......I can go drive my boat.
http://www.***boat.com/image_center/...ts_001-med.jpg
Board has been kinda slow for a while.So I asume alot of people have been working on their boats so if you would post up some pics.
Hear is some pics of my 18 gullwing rail kit I have been making still not finished.http://www.hotboatpics.com/pics/data/2/4324Rail_kt.jpg
And a pic of the moc up pump bowl back came from my Tahiti shaft imp suction and intake came from my Kachina project.Pump consist of Berk suction ,MPD shoed and ride plate intake,MPD loader,berk shaft with DPS inducer cleaned up by MPD,A B berk imp,Jetaway,prime a jet,9 vein Aggressor bowl flowed and stuffer by MPD.Aggressor droop.FTN Place diverter.http://www.hotboatpics.com/pics/data...pump18gull.jpg
Jake
This is the passenger seat of the set that Todd is putting together for me. As soon as he finishes the drivers......I can go drive my boat.
http://www.***boat.com/image_center/...ts_001-med.jpg
Hey Jake
Are ya gonna put some stiffners on that rideplate? It looks like it's got quite a bow to it. I put a straight edge on mine and when I saw how much of a bend/bow it had to it, I immediately made up the stiffners for it.
http://jetboat.homestead.com/files/rideplateside.jpg
Originally posted by MikeF
This is the passenger seat of the set that Todd is putting together for me. As soon as he finishes the drivers......I can go drive my boat.
http://www.***boat.com/image_center/...ts_001-med.jpg
Damn TODD! :eek!: I guess if you do the gel work, it's no big deal to use the deck of your boat as a work bench... However, the seats look great, and if they're done before my hull, I'll be pissed!:wink:
Originally posted by Jake W
Pump consist of Berk suction ,MPD shoed and ride plate intake,MPD loader,berk shaft with DPS inducer cleaned up by MPD,A B berk imp,Jetaway,prime a jet,9 vein Aggressor bowl flowed and stuffer by MPD.Aggressor droop.FTN Place diverter.http://www.hotboatpics.com/pics/data...pump18gull.jpg
Jake
Ya forgot the wedge!!! LOL
Man Mike that is bad ass loking todd does some nice work.
Dan I am going to use one inch by one inch bar stock? alum and drill and tap it for stiffeners they will run behind the cradel.Oyea the ride plate is not even bolted to the cradel right now.
Danhercules sorry I will try harder next time.The pics are boring so I was trying to give something to read.:wink:
Jake
Todd says he's done w/ the seats! Disco, I'm sure your boat will be done fairly soon.
Gonna go pick them up tomorrow night.
Will have some pic's this week with them installed in the boat.
Hear is mine it tacking a little longer the i would like!!!
Here's mine!
http://www.reitanfamily.com/gallery/boat01
no new pictures for me, but a 1970 rogers should make its way onto the water real soon.