OK, I`m still at 50:1 but about to lean this mutha out to 100:1
Outboard ratio. I`m still only running Sthil mix.
Wanna know how to get some r`s outa this bitch? Gotta clock mine but I`m willing to bet that I`m 43 to 47 mph now. Here`s a couple tricks:
align motor(may have to slot yours like mine)
align brakes(leave rear a lil` loose)
take paking material out of silencer
drill small hole in rear silencer cup
aluminum pipe to cover tailpipe(carefully cut to length then re-insert silencer-pipe should fit in cup)
ITS A LOT LOUDER
front tire at 22psi
rear tire at 45 (top end-cause its gonna have bottom after you do these things)
air filter cage(clip out nickle sized plastic oil deflector)
adjust needle to the fifth(lowest) setting-fatten the bitch
I found that #3 was the highest top end almost to the point of wheel wobble but a dead spot on the bottom that idle mixture couldn`t remove. Lowest setting had the whole package.
My next attempt is to open up the venturi maybe .10,,,,maybe
I will be trying stiffer clutch springs soon too as to be in the power band out of the turns.
I`ve got to get a wheelie! Then I`m done.