That regulator is for fuel injection, not carbs. 30 psi is way too much. Carb. psi should be 7- 9 psi. Looks great other than that.
OK, how does this look to everyone:
http://www.***boat.com/image_center/..._Log_2-med.JPG
I'm going with a bypass system. Fuel will come in the left end of the log, go to the carbs, the excess out the right side. I plan on running an A1000 fuel pump. This is the regulator that goes with it (Aeromotive 13101), question is: I only want around 9psi of fuel pressure, this regulator says if adjustable from 30 to 70psi, does this mean I won't be able to set the pressure that low? Remember this bypass stuff is all new to me. Thanks
That regulator is for fuel injection, not carbs. 30 psi is way too much. Carb. psi should be 7- 9 psi. Looks great other than that.
Great, **** me in the goat ass!:frown:
Aeromotive Marine Bypass Regulators (http://www.rexmar.com/page204.html)
Mallory Bypass Regulators (http://www.rexmar.com/page207.html)