Cleaning Out the Garage

[flat broke]

Okay folks, since the new motor will not be using any of this hardware, and I don't really feel like moving it after the wedding in July, I'm cleaning out the garage. All of the stuff is listed on ebay, but if a HB/CBBB board member wants it, I'll end the auction early to get it into the hands of the folks with boats. If you have any questions, just shoot me a pm or an email and I'll get back to you as soon as possible.
First up is the Weiand Team G single plane intake model 7021. This unit is for a std deck BBC with rectangle port heads.
http://i17.ebayimg.com/03/i/01/b1/5d/e7_1.JPG
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT
Take it for $120 + shipping
Next is the Eagle H-beam 6.135" rods for a BBC. The rods are in excellent shape and litterally have about 20 hours on them. The new motor is using a longer rod so I have no use for these. The rods aer set up with the ARP bolts instead of the regular Eagle bolts.
http://i22.ebayimg.com/03/i/01/b1/8e/5a_1.JPG
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT
$230 obo + shipping
To go with those nice new rods, how about a set of SRP pistons for a 4.250" stroke in a std deck BBC with a 6.135 rod? They are SRP part # 139508, .070"oversized flat tops with the same 20hrs on them as the rods. Since the new motor is using longer rods, these pistons couldn't be used either. The rods come with JE pins, but new spiralocks would be needed.
http://i11.ebayimg.com/03/i/01/b1/e2/0a_1.JPG
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMESSE%3AIT
$220obo + shipping
Because I'll be sporting a new carb, my polished stainless Teague flame arrestor needs a new home too. Its an 8" version in great condition. A nice upgrade over the standard waffle style arrestor on stock under-hatch single carb setups.
http://i21.ebayimg.com/03/i/01/b1/92/1b_1_b.JPG
http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting
the auction is currently at $26, so if you have a real hard on for it, wait a couple of days and see where it goes
And as anyone who watches the Blown/HBjet dialogues can tell you, my new motor will need the new custom valve covers to make peak HP , so I have no use for my angle sided IMCO BBC units. The valve covers are polished aluminum and come with Rex Marine Billet breathers.
http://i11.ebayimg.com/03/i/01/b1/e6/c0_1_b.JPG
http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting
$150 + shipping
Last but not least is a 9 position Trimetric floor mount handle that I was using for my diverter. The boat's gonna be moving a little faster this year, and reaching down to adjust trim isn't on the menu with the new setup. The handle can be setup as a stringer mount if needed by removing the base. The handle includes the cable hardware needed for it to work with a 43 series cable.
http://i23.ebayimg.com/03/i/01/b2/0f/6d_1_b.JPG
http://cgi.ebay.com/ebaymotors/ws/eB...ayphotohosting
$110 + shipping
Thanks,
Chris

[SPECTRABRENT]

Chris,
I want the TriMetric handle & the valve covers.
email me if they are still available.
Brentloan@aol.com
Brent

[Moneypitt]

Chris, check your PMs, I want the rods.......Moneypit/Ray

[LakesOnly]

Uh...it this the real Flate Broke?
LO

[old rigger]

Flats,
it took me a minute, but I just figured out your user name on
e-bay. Pretty cool. Just as funny as Hacksaws...........