Reply With QuoteFrom the bolt pattern, it looks like it mounts directly to the end of cylinder head. Pretty common way to do it.
ok , when i bought this motor and took it to my motor shop to tear down i really did not look at everything, i know it was mounted to the back of the motor but not sure to what, help
http://www.hotboatpics.com/pics/data/500/1DSC05074.JPG
From the bolt pattern, it looks like it mounts directly to the end of cylinder head. Pretty common way to do it.
do i use any kind of spacer, will it ge to hot going right on the head end cap. i could cut some alum spacers or something. thanks for the advise
I suspect some sort of spacers would be necessary so the mounting hardware for the MSD will clear the head. You should mount the MSD with vibration isolators.
http://static.summitracing.com/globa...msd-8823_m.jpg
MSD Isolators (http://store.summitracing.com/partde...art=MSD%2D8823)
Here's how I did mine. Still have room for a ski tow too if I wanted to put one on. Seems to work pretty good with little vibration and was easy to hide most of the wiring
http://www.pritek.net/bboat/bez60.jpg
http://www.pritek.net/bboat/bez59.jpg
http://www.pritek.net/bboat/bez58.jpg
Posting Permissions