Chris,
I manage a plastic shop and we sell glues that might help. Send a close up picture of your problem and all ask my fabricator if there's a easy way without replacement.
Mike
Ok so the Mrs. had one to many freshee's at OP6C and leaned on the molded plastic windsheild and it broke. Anyone Know of a good place to get this replaced. Boat manufacturer only sells them in pairs and their $400 plus. Any help would be appreciated. Here's a pic that shows the windsheild.
Thanks,
Chris
http://www.hotboatpics.com/pics/data...windsheild.JPG
Chris,
I manage a plastic shop and we sell glues that might help. Send a close up picture of your problem and all ask my fabricator if there's a easy way without replacement.
Mike
Call Mitch at Acrylic Design 714-630-1370. He makes them for the boat MFG. He is on the boards also under plastic man.
Try Wayne Earl in Placentia,I had to replace mine a few years back.
Mitch at acrylic designs does good work, been to his shop a couple times..
Thanks for the help guys.
AZmike I think the crack could be glued but you would still see it. I'll try Mitch and see what he can do.
Thanks again,
Chris