More Pics. Please.
Us bench racers need fodder.
mikeT
Along with everything else on the top of the motor.....I checked compression on this motor today and found a cylinder that was around #65. So I pulled the motor apart. I found one burnt valve. I will do a valve job. Also will check the bearings and maybe a cam change.
![]()
I also found that water was leaking into the block at the water ports on each end of the cylinders. So its a good thing I pulled it apart.....:wink:
http://www.***boat.com/image_center/...ad_Off-med.jpg
More Pics. Please.
Us bench racers need fodder.
mikeT
Dan
The block doesn't appear to be o ringed, what type of head gaskets were on the motor. I'm not sure what is best anymore, my motors are o ringed with copper gaskets but I see a lot of people recommending other types.
good luck with the rebuild
Originally posted by Big Boys Toy PE857
Dan
The block doesn't appear to be o ringed, what type of head gaskets were on the motor. I'm not sure what is best anymore, my motors are o ringed with copper gaskets but I see a lot of people recommending other types.
good luck with the rebuild
Big Daddy, better now than later............I say O-ring and stud it.:wink:
dan use the fel-pro 1017-1 or the 1021-1 gasket i dont think you need to o-ring your not makeing a lot of boost money well spent elsewere ckeck the bore and check the crank on the counter weight and let me know what you find
I already got a set of FitzGerald Blower head gaskets. These are suppose to be the Cats Ass.![]()
As far as the cranks it is the Forged unit 3967416. The rods are 7/16 .
I think I need a bigger cam. This one only shakes my nieghors house a 1/2 mile up the road. lmao![]()
He is inside his house eating lunch. He hears the this loud noise. He runs to the door to see what the Hell is going on....![]()
![]()
He then realizes its just me running my motor in my garage......:wink:
One of my top secret cams wolud shake the neighborhood for you.![]()
![]()
If not I am sure it would at least perform big time.
dan what's going on with the huffer since i talk to ya on the phone???????????????
later
promod![]()
What kind of boat do you have? 066 and i was talking about it yesterday and neither one of us could remember. You may have told at some time but old age has already set in. How about a pic or two?
I am pretty sure it is a blown alky motor?
Later 383
Its a 73 Nordic V-Drive. You know the fast kind....![]()