Ok, everyone says to weld the pickup, well i've done that and I've had it break along the weld and also had the housing warp and cause the relief valve to stick!. Whatever you do, don't braze it, it will probably fall off when you torque down the pump!. I know I'll get nailed to the wall for this by Info and Fiat for this but this has worked flawlesly for me for over 20 yrs!. I spread "Locktite Bearing Race Retainer" on the pickup, then I use this tool to install the pickup, then I wrap safety wire around the lip of the pickup and around the pump housing, that way if it was to come loose (I've never had one come loose yet), the pickup can't fall off!. This may sound crude to the pro's but it works for me!... Just my .02...
[img]http://www.***boat.com/image_center/data/500/12Oil_Pump_Tool-med.jpg[/img]