Hey Info I need your .02

[jlnorthrup122]

I am currently working on the design of a 25, cat that I plan on building out of aluminum. I am currently tosing around engine and drive Ideas. today I am leaning more toward custom fabbing up my own drives strait out the lowest point possible of the sponsons at the transome I'll get a pic posted so I don't haveto explain. but I was thinkin of runnen 2 outdrives out the ass end like in the pic and I am at a point were I could run 2 small blocks or run one big block. What do you think abkout this?
Thanks Info I have seen your posts on hear and it seem that you know your shit when it comes to power. wink

[jlnorthrup122]

Heres the drive pic.
http://www.***boat.com/image_center/data/503/610shaft_out_drive_01-med.jpg

[jlnorthrup122]

I haven't got to calculating the displacement andother calculations yet. But here is a link to a post with pics of the plans on it. 25' cat post (http://forums.***boat.net/ubb/ultimatebb.php?ubb=get_topic;f=15;t=003789)

[Infomaniac]

The DCB 26's run pretty good with 1 big block.
Build a big engine and put a pulse drive on it.
Link to Pulse Drive (http://www.pulsedrive.net/)
I can fix you up with the engine.
I have a good recipe for a blown small block also if you want to do two.
[ June 06, 2003, 01:18 PM: Message edited by: Infomaniac ]

[jlnorthrup122]

Thanks info Sorry to throw shop talk at yah. I'm not sure but I think on big block would be the way to go plus it would leave plenty of room to get around to it to work on it. but on the 2 small blocks you got that harmony of 2 engins purrin out back like yen and yang but them you have the headache of sincronizing then as close as possible. once agoin thanks for your .02 :)

[jlnorthrup122]

hey what kinda money would I be spendin on a 100 + mph big block from yah? :cool: me mailbox (http://jlnorthrup122@mchsi.com)